#Vizio image cleaner how to
#Vizio image cleaner full
#Vizio image cleaner tv

If you still have those annoying horizontal lines on the screen, but they are only one one side of the screen, then you may be able to MacGyver this whole thing with some tape.

#Vizio image cleaner tv

Step 7: Use Tape To Fix Partial Horizontal Lines On TV Screen If that didn’t work, then you may need to do go all MacGyver on it with some tape (see next step). You may also want to use that can of compressed air to clean the connector pins on the board and the cable in case there is some dust buildup. Use a soft, dry clean cloth to wipe the cables clean before securely reconnecting them to the board. It’s possible that the T-CON ribbon cables are bit dirtier than expected and you need to carefully clean them and reseat them on the board.įor this, you will need a steady hand and be sure to discharge any potential static electricity buildup before touching these fragile TV components.Īfter removing the back panel of the TV and discharging your static electricity carefully disconnect the T-CON ribbon cables by pulling them up from where connected to the electrical board. Step 6: Clean And Reseat T-CON Ribbon Cables

If that didn’t work, then you may need to do some deeper cleaning. Replace the back panel of the TV once you’re done and connect it to the power outlet to power up and see if the lines are gone.

#Vizio image cleaner full

If the horizontal lines on the screen are caused by the pins on the T-CON ribbon cables not having full contact with the connectors, which is a common issue, then this should fix it. Once the back panel is off the TV, take care to carefully clean the exposed components with a can of compressed air. This exposes the internal components of the TV, including the T-CON ribbon cables, which are known to lose connection to the pins as a result of dust buildup. If you want to do this step, you need lay the TV down on a blanket and remove the back panel of the TV. This step should only be attempted if the TV is no longer under warranty because opening up the back panel of the TV does void your warranty. Types of bad HDMI connections: Bad HDMI cable, Faulty HDMI port, Dirty HDMI port or cable connection, Loose HDMI cable connection. If that didn’t work, then try changing the HDMI port that you’re using.Īnd if that doesn’t work, then try a different HDMI cable because they do go bad (this has happened to me several times). Then, reseat the HDMI cables securely into the TV’s ports. So, you should disconnect all HDMI cables from the TV and inspect the ports and cable connections for any dust or debris (clean with canned air, if needed). If your HDMI cable is lose or dusty, then it can affect the picture on your screen and cause those horizontal lines. However, if this didn’t fix it for you, then keep reading for additional solutions. Most of the time, this is all you need to do in order to get the TV screen back to working on your Vizio TV. Just simply plug it back in, upon which you will start to hear the sound of it powering up. Step 3: Plug The TV Back Into The Power OutletĪfter you’ve had the TV unplugged for at least 60 seconds, and held the TV’s POWER button for at least 30 seconds, you are ready to plug the TV back into the outlet. It is important that you are holding the POWER button on the actual television, and not on the remote. To do this, you need to press and hold the POWER button on the Vizio TV for a total of 30 seconds. Next you must drain all the residual power from the TV by doing a soft reset. Once removed from the outlet, the plug should remain out until a minimum of 60 seconds pass.

You must fully remove it from the outlet. Physically remove the Vizio TV plug from your electrical outlet or surge protector. However, if your TV is no longer under warranty, then below we’ll go into depth on the DIY troubleshooting steps to get this problem fixed on your own. The standard Vizio TV warranty period against defects is just one year. Of course, with a Vizio TV still under a valid warranty period, your best option is to call them up and get a replacement. You may also need to spray air to clean out the back of the TV. To fix horizontal lines on the screen of your Vizio TV, you need to power cycle the TV and reseat all cables connected to the TV.

#Vizio image cleaner how to

Last Resort: Contacting Vizio TV Support How To Fix Vizio TV With Horizontal Lines On Screen